Projector – Kudo3D https://www.kudo3d.com Ultra High Resolution 3D Printers Wed, 08 Oct 2014 01:05:01 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://www.kudo3d.com/wp-content/uploads/2017/04/Black-logo_small_64-66x66.png Projector – Kudo3D https://www.kudo3d.com 32 32 How much power does the projector consume? https://www.kudo3d.com/faq-items/how-much-power-does-the-projector-consume/ https://www.kudo3d.com/faq-items/how-much-power-does-the-projector-consume/#respond Fri, 11 Jul 2014 03:25:58 +0000 http://www.kudo3d.com/?post_type=avada_faq&p=5915 About 290 W

]]> https://www.kudo3d.com/faq-items/how-much-power-does-the-projector-consume/feed/ 0 I already have a projector. Can I order the Titan 1 without it? https://www.kudo3d.com/faq-items/i-already-have-a-projector-can-i-order-the-titan-1-without-it/ https://www.kudo3d.com/faq-items/i-already-have-a-projector-can-i-order-the-titan-1-without-it/#respond Fri, 11 Jul 2014 03:25:05 +0000 http://www.kudo3d.com/?post_type=avada_faq&p=5913 We currently are not offering printers without projectors because the opening for 192 mm x 108 mm build size is very tight so we can not guarantee that other projectors will fit.

]]> https://www.kudo3d.com/faq-items/i-already-have-a-projector-can-i-order-the-titan-1-without-it/feed/ 0 You mentioned that the projector can be removed and used to view movies. When you reinstall the projector will it be difficult to put it back correctly without causing any errors or impacting the printing quality? https://www.kudo3d.com/faq-items/you-mentioned-that-the-projector-can-be-removed-and-used-to-view-movies-when-you-reinstall-the-projector-will-it-be-difficult-to-put-it-back-correctly-without-causing-any-errors-or-impacting-the-pri/ https://www.kudo3d.com/faq-items/you-mentioned-that-the-projector-can-be-removed-and-used-to-view-movies-when-you-reinstall-the-projector-will-it-be-difficult-to-put-it-back-correctly-without-causing-any-errors-or-impacting-the-pri/#respond Fri, 11 Jul 2014 03:24:00 +0000 http://www.kudo3d.com/?post_type=avada_faq&p=5911 There are three screws to secure the projector on the frame. When you put it back without moving in the z direction, the chance of error is small. Even if you move the projector up or down, all you need to do is calibrate the size of the projected area. Users will need to make sure that the area is the same after they put the projector back (the area is where the error comes from). If the size is not calibrated well, there will be no harm for the printing quality but the size of your printed model will not be the same as before.

]]> https://www.kudo3d.com/faq-items/you-mentioned-that-the-projector-can-be-removed-and-used-to-view-movies-when-you-reinstall-the-projector-will-it-be-difficult-to-put-it-back-correctly-without-causing-any-errors-or-impacting-the-pri/feed/ 0 What color light from the projector sets the 400 nm resin? https://www.kudo3d.com/faq-items/what-color-light-from-the-projector-sets-the-400-nm-resin/ https://www.kudo3d.com/faq-items/what-color-light-from-the-projector-sets-the-400-nm-resin/#respond Fri, 11 Jul 2014 03:21:50 +0000 http://www.kudo3d.com/?post_type=avada_faq&p=5909 400 nm is defined by both the UV filter in the projector and the photoinitiator. The resin is sensitive from 365 nm to 420 nm.

]]> https://www.kudo3d.com/faq-items/what-color-light-from-the-projector-sets-the-400-nm-resin/feed/ 0