3D Printed Small Bust
Printing Date: 2014/6/24
Build time: 4.08 hr
Size (WxDxH): 1.69 x 1.38 x 1.73 in / 43 x 35 x 44 mm
XY resolution: 33μm
Z resolution: 35μm
Special thanks to Kenzie Lamar for providing the file for this test print!
The head has dimensions of 43 mm x 35 mm x 44 mm. It was printed with XY resolution of 33 microns and Z layer thickness of 35 microns. The exposure time was 1 second, and the printing time was 14,679 seconds. This time we have minor pigment settling. During printing, we added more red resin to increase the pigment concentration. You can tell from the two horizontal lines and the color difference on the head. We also observed other lines close to the bottom of the cylinder which may be caused by inadequate lifting height for repeated full circles. However, the resolution is pretty good! The cylinder fits into the head perfectly by scaling up the head 2%.