Jewelry – Kudo3D

Diamond Structure Bracelet

even — Sat, 09 Sep 2017 09:00:19 +0000

Diamond Structure Bracelet

By Thingiverse ID 53666

Material: 3DSR UHR Resin
XY resolution: 23μm
Z resolution: 25μm

3D Printed Multi Stone Ring

even — Sat, 28 Jan 2017 03:31:36 +0000

3D printed Multi Stone Ring

By Thingiverse ID 338040

Print with Titan 2

Material: 3DSR Cast Resin
XY resolution: 37μm
Z resolution: 35μm

Pino’s Rings

even — Sat, 28 Jan 2017 03:19:51 +0000

3D printed Rings

Design by Pino’s ReMida LTD

Material: 3DSR Cast Resin
XY resolution: 26μm
Z resolution: 20μm

Pino’s Rings

even — Sat, 24 Sep 2016 03:18:44 +0000

Pino’s Rings

Printed by Kudo3D Titan 2.
Designed by ReMida LTD

XY resolutions: 31 microns
Z thickness: 25 microns

Ring by Smita Lai

even — Fri, 25 Sep 2015 15:00:06 +0000

Ring by Smita Lai

Print Date: 5/20/2015
Size(WxHxD): 20.5 mm x 9.4 mm x 26.1 mm
Material: 0.45 ml / 3DM Cast resin
XY pixel size: 37 micron
Z layer thickness: 35 micron

Skull Ring

even — Thu, 25 Jun 2015 15:11:50 +0000

Skull Ring – printed by Kudo3D Titan 1

Build Time: 3.5 hr
XY pixel size: 37μm
Z layer thickness: 35μm

Multi Stone Ring

even — Sun, 14 Jun 2015 07:52:05 +0000

Multi Stone Ring

Print Date: https://www.kudo3d.com/wp-admin/edit.php?post_type=avada_portfolioJune 2015 to Dec 2016

Multi Stone Ring by Mariblueruby.

Build Time: Less than 1 hr
Size (WxDxH): 21.3 mm x 6.1 mm x 25 mm
Finish: Casted and Added Stones
XY pixel size: 37μm
Z layer thickness: 35μm

52 prints in a row

even — Sat, 07 Mar 2015 09:04:22 +0000

Completed 52 prints in a row!

Completed 52 prints in a row for testing new PSP container.

We recently launched our second-generation PSP resin container. Our testing of the container has yielded excellent results. We have completed 52 prints in a row! We are observing higher resolution and better surface smoothness. We only used about 200g of castable resin to complete all of these prints.

Printing speeds have increased as well! At 37 microns XY and 35 microns Z, we are printing around 40% faster at 1 inch per hour. Speed improvements will gradually decrease as resolution decreases towards 100 microns XY. All of the prints in the pictures took between 1 to 2 hours to print. The rings took only 1 hour!

3D Printed Rings – Mariblueruby, Noah Beasley

even — Sat, 07 Mar 2015 08:54:49 +0000

3D Printed Rings – Mariblueruby, Noah Beasley

Top 15 are from Maribluruby. Buttom 2 are from improbablecog.

Design by:
Mariblueruby
Mariblueruby Carapace Ring
Noah Beasley and Improbablecog (improbablecog.com)

Printing Date: 2015/2/1
Size (WxDxH): 65 x 33 x 27 mm / 2.56 x 1.3 x 1.06 in
Material Volume: 8 ml
XY pixel size: 37μm
Z layer thickness: 35μm

3D Printed Ring – Sheraz Atiqe

even — Sat, 07 Mar 2015 08:36:34 +0000

3D Printed Ring – Sheraz Atiqe

Design by Sheraz Atiqe

Printing Date: 2015/1/28
Build time: 111 min
Size (WxDxH): 29.6 x 18.5 x 36.6 mm / 1.17 x 0.73 x 1.44 in
Material Volume: 1.2 ml
XY pixel size: 37μm
Z layer thickness: 35μm