Micro – Kudo3D

Micro Needle Array – 140 µm (15 µm XY)

Kudo3D Tech Support — Sun, 18 Oct 2020 14:28:31 +0000

This micro needle array is printed with 385nm Micro 15 µm XY pixel size.
The tip has only one pixel. This is the smallest needle achieved with a DLP 3D printer.

The second photo is a comparison between 15 and 25 µm XY pixel size for the same needle.

Micro Lattice – 50 µm

Kudo3D Tech Support — Sun, 18 Oct 2020 11:21:22 +0000

This 50 µm micro lattice is printed with 365 nm Micro printer.

Resin used: 3DSR UHR
XY Pixel size: 25 µm
Z Layer thickness: 25 um

Micro channel -100 µm

Kudo3D Tech Support — Sun, 18 Oct 2020 10:33:31 +0000

This microchannel is fabricated with PDMS molding.
PDMS is cured at 120 degree Celsius for 30 minutes.
The mold can be printed with either Micro or Titan 3
The resin used is 3DSR UHR resin
The XY pixel size is 25 µm
The layer thickness is 20 µm

Micro Wire – 50 µm

Kudo3D Tech Support — Sun, 18 Oct 2020 10:03:57 +0000

Micro Needle Array – 250 µm

Kudo3D Tech Support — Sat, 18 Jul 2020 13:20:28 +0000

The 250 µm micro needle array can be printed with Titan 3 or Micro printer.

Resin used: 3DSR UHR
XY Pixel size: 25 µm
Z Layer thickness: 15 um

Micro Mixer – 300 µm channels

Kudo3D Tech Support — Mon, 18 May 2020 10:50:10 +0000

The 300 µm mixer can be printed with Titan 3 or Micro printer.

Resin used: 3DSR UHR
XY Pixel size: 25 µm
Z Layer thickness: 25 um

Micro Needle Testing

Kudo3D Tech Support — Wed, 18 Mar 2020 14:15:49 +0000

The testing model is printed with 385nm Titan 3 25 µm XY pixel size.
The resin used is 3DSR UHR.

Micro Lattice

even — Fri, 08 Jul 2016 12:40:39 +0000

3D Print: Lattice Print / Mesh Print

Height: 20 mm
XY pixel size: 37μm
Z layer thickness: 25μm