The starter kit includes everything you need except a container and IPA alcohol. It includes a lens duster, dust blower, silicone funnel, calibration ruler, blade, spatula, cutter, level, screw driver, tweezers, and a wrench.
Exposure Time Scale Resolution (XY) Width (mm) Length (mm) Area (mm squared) Scaling Factor Base Line Exposure Time Recommended (seconds) 26 microns 28 49.8 1,393.7 0.5 1 37 microns 40 71.1 2,844.4 1 2 50 microns 54 96 5,184 1.8 3.6 75 microns 81 144 11,664 4.1 8.2 100 microns 108 192 20,736 [...]
Please keep an area of at least 6 inches from the side with the fan and 2 inches from other sides. The machine can not be enclosed in a box during operation. More clearance area will extend the life of the projector and the other printer components.
Titan 1 is faster because solid layers are formed in a two-dimensional fashion (not by one-dimensional laser drawing). Our patent-pending passive self-peeling technology is also the key to our fast speed, minimizing the separation force between cured layers.
If the printer is well calibrated without moving the projector around, it can be very precise. For high precision prints, you will need resin that has very low shrinkage.
The printer is very quiet most of the time. You may hear the resin container making a sound when the separation force is greater. Depending on what type of resin you are going to use, some have a very mild smell. It is a good practice to have the printer sitting in an open area.
In terms of reducing maintenance/reliability costs, we designed Titan 1 by modularizing the system with off-the-shelf components. Furthermore, we reduced the number of parts and moving parts for the whole system. The most expensive parts are the linear stage module and projector, which are purchased from big companies (with very few maintenance issues). We only [...]
Resolution is adjusted by measuring the projected area on the Teflon film while positioning the projector. Area can be fine tuned by turning the focus / zoom. It's best to leave the zoom in the middle first, and then move the projector to somewhere close to the resolution you need. Users can use a ruler [...]
Both are compatible with 110-240V and AC 50/60 Hz. We have orders from all over the world so users have to buy adapters themselves. We will provide a list of plugs/adapters to our users before shipping.
If you post-cure under the sun, you don't need a UV lamp, but it is advisable to rotate your print periodically. Kudo3D's UV lamp speeds up the post-curing process by providing a more intense amount of UV light, and the print is cured evenly with internal mirrors.
