About even

This author has not yet filled in any details.
So far even has created 21 blog entries.

How Do I Set Up the Printing Parameters?

2019-06-27T17:36:15-07:00

Another key part of learning the printing process is to understand how to set the printing parameters within in the Kudo3D software. There is no “one-fits-all” parameter number that can be duplicated for any type of resin or with any type of 3D design. This being said, the printing parameters will differ every time you [...]

How Do I Set Up the Printing Parameters?2019-06-27T17:36:15-07:00

Why Cured Layers Could Stick to the Resin Container

2019-06-27T17:36:15-07:00

For a bottom up stererolithography 3D printer, a cured resin layer may stick to the vat floor and be hard to separate. Silicone is often used as the vat floor because of its elasticity that can facilitate the separation of cured layers. However, the resins will gradually react with silicone and the silicone will turn [...]

Why Cured Layers Could Stick to the Resin Container2019-06-27T17:36:15-07:00

What is Background Curing?

2021-09-17T02:50:31-07:00

What exactly is background curing and what is the impact of it on your print? Background exposure, as the name suggests, is the light that appears in the background. Ideally, the background should be fully black with no light at all. However, for DLP, there always is residual light scattering back into the lens and [...]

What is Background Curing?2021-09-17T02:50:31-07:00

Understanding Kudo3D’s PSP Resin Container

2019-06-27T17:36:15-07:00

Layer separation mechanism is one of the most important factor that determines the performance of a bottom-up high resolution SLA 3D printer. Therefore, the resin container is also one of the most important part of a bottom-up high resolution SLA 3D printer. Kudo3D uses a US patented PSP technology to minimize the force required to [...]

Understanding Kudo3D’s PSP Resin Container2019-06-27T17:36:15-07:00

Understanding Kudo3D High Resolution Calibration Model

2019-06-27T17:36:15-07:00

Other than being one very interesting print, the Kudo3D high resolution calibration model has some special key points that will help you optimize the exposure time for a specific resolution. In addition to seeking normal exposure times, this high resolution sample also provides a plethora of other information about the resin. Once the normal exposure [...]

Understanding Kudo3D High Resolution Calibration Model2019-06-27T17:36:15-07:00

What makes Kudo3D’s SLA 3D printers so unique?

2019-06-27T17:36:15-07:00

Being one of the core components in the 4th industrial revolution, 3D printing has evolved in such an astonishing speed. However, the technology behind each printer is so diverted that some of the first time users or those who want to get their very first 3D printer might not be that confident in identifying the [...]

What makes Kudo3D’s SLA 3D printers so unique?2019-06-27T17:36:15-07:00

Another breakthrough: releasing our new model – the Titan 2 two years after our successful Kickstarter launch

2019-06-27T17:36:15-07:00

Ever since our highly successful Kickstarter launch in May 2014, we have been making a marked difference in the 3D printing industry. Our Titan 1 has been widely used in the Jewelry, dental, academics, gaming and rapid prototyping industries all over the world. Now in June 2016, we have just launched our second-generation 3D printer, [...]

Another breakthrough: releasing our new model – the Titan 2 two years after our successful Kickstarter launch2019-06-27T17:36:15-07:00

DM1: Prototyped on the Titan 1!

2019-06-27T17:36:15-07:00

DM1: Prototyped on the Titan 1! Erik Moon, one of our Titan 1 Kickstarter backers and owner of Decadent Minimalist, has just released his second Kickstarter campaign, DM1: Titanium and Carbon Fiber Wallet! The DM1 is truly a minimalist design. With no straps, no clips, no clasps, hinges, or magnets, the DM1 is just one [...]

DM1: Prototyped on the Titan 1!2019-06-27T17:36:15-07:00

Titan 1 was featured on an article on Stereolithography by Eaglemoss Publications!

2019-06-27T17:36:15-07:00

Titan 1 was featured on an article on Stereolithography by Eaglemoss Publications! Titan 1 was featured on an article on Stereolithography by Eaglemoss Publications! Learn more about how light causes photoresin to cure. Also enjoy the pictures of prints by the Titan 1! Download the pdf article!      

Titan 1 was featured on an article on Stereolithography by Eaglemoss Publications!2019-06-27T17:36:15-07:00

SLA 3D Printing: Difference in Laser and DLP Light Pattern Generation

2019-06-27T17:36:15-07:00

SLA 3D Printing: Difference in Laser and DLP Light Pattern Generation What makes the Titan 1 different from other SLA 3D printers? But first, what is SLA 3D printing? SLA stands for stereolithography. In this method of additive manufacturing, a 3D printed object is built layer-by-layer using a liquid resin (photopolymer) that is cured using [...]

SLA 3D Printing: Difference in Laser and DLP Light Pattern Generation2019-06-27T17:36:15-07:00

Title

Go to Top