Why Cured Layers Could Stick to the Resin Container

2017-04-02T03:20:59+00:00

For a bottom up stererolithography 3D printer, a cured resin layer may stick to the vat floor and be hard to separate. Silicone is often used as the vat floor because of its elasticity that can facilitate the separation of cured layers. However, the resins will gradually react with silicone and the silicone will turn [...]

Why Cured Layers Could Stick to the Resin Container2017-04-02T03:20:59+00:00

Understanding Kudo3D’s PSP Resin Container

2017-04-02T03:20:59+00:00

Layer separation mechanism is one of the most important factor that determines the performance of a bottom-up high resolution SLA 3D printer. Therefore, the resin container is also one of the most important part of a bottom-up high resolution SLA 3D printer. Kudo3D uses a US patented PSP technology to minimize the force required to [...]

Understanding Kudo3D’s PSP Resin Container2017-04-02T03:20:59+00:00

Resin and PSP Resin Container Clean-up Process

2017-02-20T11:34:06+00:00

Resin and PSP Resin Container Clean-up Process What’s next after you finish printing and post-processing? At first glance, cleaning up after printing with resin seems like a messy task, especially when compared to FDM 3D printing. However, the clean-up process is actually pretty simple: Recycle. Wash. Dry. And you're ready to begin printing again. We'll [...]

Resin and PSP Resin Container Clean-up Process2017-02-20T11:34:06+00:00