Is the Titan 1 compatible with other resin containers?
even2014-07-11T03:28:48-07:00Titan 1 is not compatible with other resin containers.
When I change materials will I need a new PSP container?
even2014-07-11T03:28:07-07:00You can wash the resin off of the container - or, for convenience, you can order an additional container.
How many prints can the PSP container print before needing to be replaced?
even2014-07-11T03:27:26-07:0030 to 50 prints are our conservative estimate of printing average print sizes. When printing smaller objects, the PSP container may support more prints.
I already have a projector. Can I order the Titan 1 without it?
even2014-07-11T03:25:05-07:00We currently are not offering printers without projectors because the opening for 192 mm x 108 mm build size is very tight so we can not guarantee that other projectors will fit.
You mentioned that the projector can be removed and used to view movies. When you reinstall the projector will it be difficult to put it back correctly without causing any errors or impacting the printing quality?
even2014-07-11T03:24:00-07:00There are three screws to secure the projector on the frame. When you put it back without moving in the z direction, the chance of error is small. Even if you move the projector up or down, all you need to do is calibrate the size of the projected area. Users will need to make [...]
What color light from the projector sets the 400 nm resin?
even2014-07-11T03:22:27-07:00400 nm is defined by both the UV filter in the projector and the photoinitiator. The resin is sensitive from 365 nm to 420 nm.
How is the Titan 1 so fast?
even2014-07-11T03:19:54-07:00Titan 1 is faster because solid layers are formed in a two-dimensional fashion (not by one-dimensional laser drawing). Our patent-pending passive self-peeling technology is also the key to our fast speed, minimizing the separation force between cured layers.
Is the Titan 1 precise?
even2014-07-11T03:17:56-07:00If the printer is well calibrated without moving the projector around, it can be very precise. For high precision prints, you will need resin that has very low shrinkage.
How much sound and smell/gases (if any) does the Titan 1 give off when printing?
even2014-07-11T03:17:07-07:00The printer is very quiet most of the time. You may hear the resin container making a sound when the separation force is greater. Depending on what type of resin you are going to use, some have a very mild smell. It is a good practice to have the printer sitting in an open area.