In terms of reducing maintenance/reliability costs, we designed Titan 1 by modularizing the system with off-the-shelf components. Furthermore, we reduced the number of parts and moving parts for the whole system. The most expensive parts are the linear stage module and projector, which are purchased from big companies (with very few maintenance issues). We only [...]

Resolution is adjusted by measuring the projected area on the Teflon film while positioning the projector. Area can be fine tuned by turning the focus / zoom. It's best to leave the zoom in the middle first, and then move the projector to somewhere close to the resolution you need. Users can use a ruler [...]

Both are compatible with 110-240V and AC 50/60 Hz. We have orders from all over the world so users have to buy adapters themselves. We will provide a list of plugs/adapters to our users before shipping.

If you post-cure under the sun, you don't need a UV lamp, but it is advisable to rotate your print periodically. Kudo3D's UV lamp speeds up the post-curing process by providing a more intense amount of UV light, and the print is cured evenly with internal mirrors.

There is no need to swap out the resin container between prints. Users can print with one resin container for any number of prints in immediate succession.

Having two build platforms will reduce the turn-around time caused by post-curing.

Form 1 uses a conventional scanning laser SLA technology, which utilizes a laser and two actuated mirrors to project images onto the resin as you can see in a laser show. Titan 1 uses a DLP projector to project images onto the resin in a two dimensional fashion. Therefore, time required to expose the resin [...]

The build volume is 70mm x 40mm x 240mm at 37 micron resolution. The build volume is 192mm x 108mm x 240mm at 100 micron resolution.

The only difference is the design. Both are made with the same high quality acrylic material.