There is no need to swap out the resin container between prints. Users can print with one resin container for any number of prints in immediate succession.
Having two build platforms will reduce the turn-around time caused by post-curing.
Form 1 uses a conventional scanning laser SLA technology, which utilizes a laser and two actuated mirrors to project images onto the resin as you can see in a laser show. Titan 1 uses a DLP projector to project images onto the resin in a two dimensional fashion. Therefore, time required to expose the resin [...]
The build volume is 70mm x 40mm x 240mm at 37 micron resolution. The build volume is 192mm x 108mm x 240mm at 100 micron resolution.
The only difference is the design. Both are made with the same high quality acrylic material.
